Golf GTI L4-1984cc 2.0L DOHC (9A) (1990)
![background image](/volkswagen/golf_gti/l4-1984cc_2.0l_dohc_(9a)/Page-1483002.png)
-
Installing final drive gear
^
Heat gear to approx. 100°C (212°F) before installation
^
Use bolts (A) from repair kit to guide final drive gear on during installation
-
Attaching final drive gear to differential housing
^
Special bolts, washers and nuts - part no. 171 498088 A (repair kit)
^
Tighten to: 65 Nm (48 ft lb)
2
Special rivet
-
Secures shaft for differential gears
-
When repairing differential, secure shaft with circlips after removing rivet