Golf III L4-1984cc 2.0L SOHC (1993)
Repairs and Inspections Required After a Collision: Service and Repair
Air Bag System
Airbag units, replacing following an accident
Accident involving activation of airbag
Always replace the following:
All triggered airbag units
All control modules for triggered airbags
All sensors for triggered airbags
All seatbelts with triggered belt tensioners
Support for front passenger airbag unit, if unit is triggered
Airbag spiral spring/return spring with slip ring -F138- for drivers airbag if unit is triggered
Seat cover and cover clips, if side airbag is triggered
Visually check and replace all damaged components
Accident not involving activation of airbag
If the airbag Malfunction Indicator Lamp (MIL) -K75- does not indicate any malfunction, it is not necessary to replace any airbag component.
WARNING! The seat belts should be checked separately.
After replacing the airbag units or the airbag control module, attach stickers (only tear-off strips) to the registration card and return the card to relevant
dealer or to importer for registration.
When replacing either the airbag unit or the airbag control module -J234-, see your Parts Department for the proper registration procedure.