Golf III L4-2.0L (ABA) (1995)
Center Console Without Airbag
-
Pull out ashtray and remove hexhead screws -6-.
-
Pull cover -5- to rear off center console and disconnect electrical connectors.
-
Remove hex nuts -4-.
-
Remove Phillips-head screws -1- (left and right sides).
-
Lift rear end of console slightly and remove from instrument panel.
-
Disconnect electrical connectors.
Installing
-
Place spacers -3- on studs.
-
Insert console with retaining pins -2- into instrument panel.
-
Install center console in reverse order of removal.