Golf III L4-2.0L (ABA) (1995)
Hood Sensor/Switch (For Alarm): Service and Repair
Located left side of engine compartment, near shock tower. See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Locations
Removal and Installation
-
See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Service Precautions
-
Remove 2-pin connector from contact switch -F120-.
-
Remove contact switch from mounting bracket.
-
Install in reverse order of removal.
NOTE: The switch will only operate properly if it has been correctly installed. After repairs, recheck the installation if necessary