Golf III L4-2.0L (ABA) (1995)
Radiator: Diagrams
Legend
1
Mounting
2
Bolt
-
Tighten to: 10 Nm (7 ft. lbs.).
3
Radiator
-
After replacing radiator, replace coolant.
4
V-belt
-
Only with optional equipment.
5
Guide Ring
-
Note installed position.
-
Attached to fan shroud with clips.
6
Coolant Fan
7
Coolant Hose, Upper To Connector Pipe
8
Coolant Hose, Lower To Coolant Pump
9
Auxiliary Fan
-
Only installed on models with optional equipment.
10
Fan Shroud
-
Note installed position.
11
Connector
12
Cover
13
Expansion Tank
14
To Coolant Pipe Or Connector Flange
-
On models with manual transmission, connects to item No. 13 of coolant pipe diagram, refer to Radiator Hose.
-
On models with automatic transmission, connects to item No. 9 of coolant pipe diagram, refer to Radiator Hose.
15
To ATF Cooler
-
On models with automatic transmission.
16
To Cylinder Head
17
Cap
-
Pressure test with tester tool No. VAG 1274 and adapter VAG 1274/4.
-
Pressure specifications: 1.3-1.5 bar (19-22 psi).
18
Coolant Fan Control Thermal Switch
-
Tighten to: 35 Nm (26 ft. lbs.).
-
Switching temperatures:
1st stage:
ON: 92-97°C (197-206°F)
OFF: 84-91°C (183-195°F)