Golf III L4-2.0L (ABA) (1995)
- Install washers -1- over 3302 peening punch and onto bonded rubber bushing -2-
- Install pressure sleeve of 3302 peening punch and press on.
- Crimp washers on spacer sleeves using press. Use VW432 arbor as support.
- If necessary, remove burrs caused by crimping
Engine/transmission mount torque
- Specifications are for lightly oiled bolts.
Front engine/transmission mount
A
55 Nm (41 ft lb)
B
55 Nm (41 ft lb)
C
55 Nm (41 ft lb)
Right rear engine/transmission mount