Golf III L4-2.0L (ABA) (1995)
Exhaust System
1 - 40 Nm (3O ft lb)
2 - Locking clamp
3 - Intermediate pipe
4 - Bracket
5 - 25 Nm (18 ft lb)
6 - Front and rear muffler
^ available as separate replacement parts
- cut the connecting pipe at a right angle at point 10
- connect the front and rear muffler with a double clamp
- slide the double clamp flush with mark 8
7 - Dimension c
^ c = approx. 10 mm (1/4 in.)
8 - Marking for double clamp (to be used when replacing one of the
mufflers)
^ marked three times on the pipe circumference
9 - Cutting point
10 - Dimension b
^ b = approx. 5 mm (3/32 in.)
11 - Marking
^ marked three times on the pipe circumference
12 - Retaining ring
13 - Bracket
14 - 20 Nm (15 ft lb)