Golf III L4-2.0L (ABA) (1995)
Evaporator Core: Service and Repair
NOTE: Part numbers are for reference only. Always check with a VW Parts Department for latest parts information.
To remove evaporator housing for disassembly:
-
Discharge A/C refrigerant system. See: Service and Repair
-
Drain engine coolant.
-
Remove instrument panel and support bracket. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair
-
Remove heater box/evaporator housing. See: Heater Core/Service and Repair
1 - Seal
2 - Upper evaporator housing
- Seal grooves and contact surfaces with silicone sealant, Part No. AKD 476 KD5 05, or equivalent
3 - Evaporator
4 - Funnel
- To guide sensor tube for A/C evaporator temperature switch -E33-
5 - Air intake ring
6 - Lower evaporator housing
- Seal grooves and contact surfaces with silicone, sealant Part No. AKD 476 KD5 05, or equivalent