Golf III L4-2.0L (ABA) (1995)
Caution!
Always replace the cap if it is of the separate cap/plug type. The cap secures the plug.
ATF, Changing
ATF, CHANGING
-
Remove ATF level plug from oil pan (arrow).
-
Remove overflow tube through the plug hole.
-
Drain ATF.
-
Install overflow tube.
-
Screw level plug in hand-tight.
-
Fill with 3 Liters of ATF through filler pipe.
-
Start engine and shift through all selector lever positions with vehicle stationary.
-
Check and top up ATF level
Specification: Use only VW ATF