Golf III L4-2.0L (ABA) (1995)
ATF Level, Checking
Checking Conditions
-
Transmission not in emergency run mode, ATF temperature not above approx. 30° C (86° F).
-
Vehicle level.
-
Selector lever in "P".
-
Attach VAG 1924 ATF filling system reservoir to vehicle.
-
Connect VAG 1551 scan tool and enter address word "02 Transmission electronics". Advance until "Select function XX" is indicated on display.
-
Start engine.
-
Raise vehicle.
-
Place container under transmission.
[ Rapid data transfer
HELP ]
[ Select function XX
]
-
Press buttons -0- and -8-. (Function "Read measured value block" is selected with -08-).
[ Rapid data transfer
Q ]
[ 08 - Read measured value block
]
-
Press -Q- button to confirm entry.
[ Reading measured value block
]
[ Enter display group number XX
]
-
Press buttons-0- and -5-to select function 05, Display group number.
-
Press -Q- button to confirm entry.
[ Reading measured value block 05
-> ]
[ 30 0 C 0011011 0 900 rpm
]
First display zone shows ATF temperature.
-
Bring ATF to test temperature.
Test temperature: 35° C to 45 °C (95 to 113° F).