Golf III L4-2.0L (ABA) (1995)
Underhood Component Location
-
Remove cap from CO Tap Tube (# 11 in image). Connect an EPA approved CO tester to the CO Tap Tube using VW special tool #6006-0019
high temperature silicone connecting hose, (or equivalent).
NOTE: Non-approved connecting hoses may dramatically alter your readings. Adaptor must be connected tightly to CO tap tube to prevent
measuring errors.
-
Display and erase DTC memory, after display of code 0000 (DTC clear) leave ignition switch turned ON.
ENGINE BASIC SETTING INITIATING
-
Display and erase DTC memory, after display of code 0000 (DTC clear) leave ignition switch turned ON.
-
START engine and let IDLE (1300 rpm maximum) with throttle closed.