Golf III L4-2.0L (ABA) (1995)
V.A.G. Display
Example shown of the display for the airbag control module identification number with the applicable index letter, code number and dealer code.
If shown, the coding has been completed successfully. If not:
V.A.G. Display
The airbag control module was not correctly programmed with the applicable vehicle data. Coding is no longer possible. The Airbag Malfunction
Indicator Lamp (MIL) will come on and stay on continuously.
Check whether the correct airbag control module was installed (compare Part No. and identification number), or whether an incorrect dealer number was
entered.
End output:
-
Press -> button.
V.A.G. Display
-
Press -0- and -6- buttons to end output.
-
Press -Q- button to confirm input..
V.A.G. Display
The Malfunction Indicator Lamp (MIL) -K75- must go out after not more than 4 seconds.