Golf III L4-2.0L (ABA) (1995)
Battery: Service and Repair
Battery, Jump Starting
WARNING:
-
Car with good battery must NOT be running when connecting jumper cables.
-
DO NOT allow battery charging voltage to exceed 17 volts.
-
DO NOT expose a fully discharged battery to freezing temperatures; the battery will be damaged. DO NOT attempt to jump start a
vehicle with a frozen battery.
-
See: Service Precautions
Connecting Jumper Cables
Connect jumper cables in following order:
1- One end of positive cable -red- to (+) post -1- of good battery.
2- Other end of positive cable -red- to (+) post -2- of dead battery.
3- One end of negative cable -black- to (-) post -3- of good battery.
4- Other end of negative cable -black- to engine block -4- of car with dead battery.
-
Start car with good battery first.
-
Next start car with dead battery.
-
Disconnect jumper cables in reverse order.