Golf III L4-2.0L (ABA) (1995)
096 Transmission
3rd and 4th GEAR CLUTCH -K3- WITH PUMP SHAFT, 096 TRANSMISSION
Transmissions from 01-93
1
- Circlip
- Different thicknesses for different clutch assemblies
- Mark after removing and install in same position
2
- Thrust plate
- Install with stepped side facing circlip
3
- Inner plate
4
- Outer plate
5
- Pressure plate
- Install with peened corrugated washer facing piston
6
- Corrugated washer
- Peened to thrust washer
7
- Circlip
- Removing and installing - Fig. 1
8
- Piston cap
- Sealing lips are vulcanized to piston cap
- Moisten with ATF before installing
- Turn piston cap slightly when installing
- When removing and installing press down and fit circlip -7-
9
- Spring
- Seat between piston and piston cap
10 - Piston