Golf III L4-2.0L (ABA) (1995)
Park Gear: Service and Repair
096 Transmission
PARKING LOCK, 096 TRANSMISSION
Disassembling and Assembling
Note:
- The Multi-Function Transmission Range (TR) Switch -F725- and the Vehicle Speed Sensor (VSS) -G68- can be tested in the vehicle by the
On Board Diagnostic.
- The output gear must be removed to disassemble and assemble the parking lock
1
- Return spring
- Inserting - Fig. 4
2
- Detent lever
- Inserting with return spring - Fig. 4
3
- Parking lock gear
- Rounded side faces teeth of drive pinion
4
- Bolt
- Tightening torque: 14 Nm (10 ft lb)
5
- Supporting plate
- Installing - Fig. 3
6
- Guide plate
- Insert before supporting plate - Fig. 3
7
- Bolt
- Tightening torque: 3.5 Nm (31 in lb)
8
- Manual selector valve control