Golf III L4-2.0L (ABA) (1995)
-
Remove valve body plug for B2 selector (arrow -3-) and install white plug from repair kit (turn counterclockwise to remove).
-
Remove valve body plug for K1 selector (arrow -4-) and install white plug from repair kit (turn counterclockwise to remove).
^
Plugs -3- and -4- are secured by turning clockwise 1/4 turn.
-
Install NEW ATF screen gasket into valve body.
-
Firmly press ATF screen onto valve body.
-
Reinstall ATF oil pan.
Note:
Always replace pan gasket.
Always press spacer bushing into new gasket.
^
Torque pan bolts to 12 Nm (9 ft lb)
-
Fill and check transmission fluid level -> appropriate Repair Manual for models listed.
When procedure applies to vehicles within the New Vehicle Limited Warranty use the following:
Part Identifier:
3800
Labor Operation: 3800511
95 TU