GTI L4-2.0L (AEG) (2000)
Touching Up Paint Damage
Paint composition is to be restored and corrosion protection measures performed according to specification.
The following repair method is suitable for paint finish damaged in a zone which is not visible:
-
Paint over twice (wet-on-wet) with glass/paint primer D 009 200 02. Air drying time = approx. 10 minutes.
Cleaning Off Surplus Adhesive Sealing Material
It is recommended to use adhesive remover D 002 000 10 as a cleaning solution. Application of this product requires conformance with safety
precautions.
WARNING: Glass which has just been installed should not be pressed outward while cleaning from inside the vehicle.
-
Clean painted surface roughly with a dry cloth. Remove remaining adhesive with adhesive remover D 002 000.10.
Cleaning plastic trim
Allow adhesive sealing material to cure (approx. one hour) and then peel off.