GTI L4-2.0L Turbo (BPY) (2007)
Front Door Weatherstrip: Service and Repair
Outer Door Seal, Removing and Installing
Outer Door Seal, Removing And Installing
NOTE:
-
Removing and installing is described only for the right outer door seal. Removing and installing the left outer door seal is derived accordingly
from this.
-
Remove protective foil only immediately prior to assembly. Processing temperature approx. 20° C.
-
Adhesive remover D 002 000 10 is to be used exclusively.
-
The outer door seal must be applied immediately after cleaning.
-
After 10 minutes, check the seal for a secure fit.
Removing
-
Pull off outer door seal from door.