GTI L4-2.0L Turbo (BPY) (2007)
Trunk / Liftgate Latch: Service and Repair
Rear Lid Lock, Removing and Installing
Rear Lid Lock, Removing And Installing
NOTE: If rear lid does not open, it can opened by hand via the emergency release - 1 - on lid lock - 2 -. Emergency release is accessed through an
opening in the rear lid trim.
Removing
-
Remove rear lid trim;
-
Disconnect harness connector - 4 - from lid lock - 2 -.
-
Remove screws - 3 - and guide lid lock - 2 - downward out of lid.
Installing
-
Guide lid lock - 2 - into lid and install screws - 3 -.
-
Tightening torque for bolts - 3 -: 23 Nm
-
Connect harness connector - 4 - to lid lock - 2 -.
Further installation is in reverse order of removal.
-
Before the rear lid is closed, a function test of the unlocking components must be performed.