GTI L4-2.0L Turbo (BPY) (2007)
Trim Panel: Service and Repair
C-Pillar
C-pillar Trim, Removing And Installing
NOTE: Removal and installation is described for the left-hand side of the vehicle. Removal and installation for the right-hand side is performed in the
same manner.
Removing
-
Switch off ignition.
4-door vehicles
-
Remove seat bench.
-
Remove 4-door side upholstery:
-
With rear side airbags.
-
Without rear side airbags.
2-door vehicles
-
Remove upper B-pillar trim. Belt anchor or belt anchor rail do not need to be removed from front seat belt.
-
Remove seat bench.
-
Remove backrest.
-
Remove side trim.
All vehicles
-
Remove luggage compartment cover side compartment.
-
Remove roof end strip.
-
Remove airbag emblem - 1 - and remove screw - 2 - (4 Nm).
NOTE: When re-installing, airbag emblem - 1 - must be replaced.
-
Remove nut - 3 - (1.5 Nm).
-
Loosen trim from threaded pins in nut - 3 - - arrow A -.
-
Remove trim from mounts - arrow B - and door seal tubing.