GTI L4-2.0L Turbo (BPY) (2007)
-
Disconnect the electrical harness connectors present.
-
Drain coolant and disconnect coolant lines
-
Disconnect condenser lines
-
With a second technician, unscrew guide rod T 10093 on longmember on left and right sides and lift out lock carrier.
CAUTION: If lines for A/C system and/or for coolant are disconnected, the powertrain aggregate must no longer be started.
NOTE:
-
Do not hang condenser and hydraulic oil cooler on hoses.
-
Lines for condenser and hydraulics must not be kinked.
Installing
Installation is performed in the reverse order of removal.
-
Make sure that all plug and hose connections are corrected installed when reassembling.
-
Center lock carrier on side rails and between fenders