GTI L4-2.0L Turbo (BPY) (2007)
3. Torx bolt, 4 Nm
4. Brake pads
^
Thickness 14 mm without backing plate
^
With wear indicator
^
When wear limit is reached (limit: approximately 4 mm), the warning lamp lights up in instrument cluster
^
Wear limit: 2 mm without backing plate
^
Must always be replaced together on both sides of axle
5. Retaining spring
^
Insert in both holes of brake caliper
6. Brake carrier
^
Bolt to wheel bearing housing
7. Brake caliper
^
Do not remove brake hose when replacing brake pad
8. Guide pins, 30 Nm (18 ft lb)
9. Concealment cap
^
Remove
10. Brake hose with banjo fitting and union bolt, 35 Nm
11. Guide pins, 30 Nm (18 ft lb)
12. Concealment cap
^
Remove
13. Bolt
14. Bracket
15. Ribbed bolt, 190 Nm
^
Clean if re-using
16. Wheel bearing housing
^
With fastened brake carrier
17. ABS wheel speed sensor
^
Before inserting sensor, clean inner surface of bore hole and coat with hot bolt paste G 052 112 A3
18. Hex socket head bolt, 8 Nm
19. Wheel bearing/hub unit
^
The ABS sensor ring is installed in wheel bearing
20. Cover plate
Brake Caliper, Removing and Installing
Brake caliper, removing and installing
Special tools, testers and auxiliary items required