GTI L4-2.0L Turbo (BPY) (2007)
-
Insert inner brake pad (piston side) - 1 - and outer brake pad - 2 - with retaining springs into brake caliper.
^
Inner brake pad (piston side) with large three-finger clip - 1 -.
^
Outer brake pad with small three-finger clip - 2 - (colored black).
-
Place brake caliper with brake pads on brake carrier first at bottom - arrow -.
-
Tighten brake caliper to brake carrier using both guide pins.
^
Pin of brake caliper must stand behind guide of brake carrier!
-
Install both protective caps.
-
Connect brake pad wear indicator connector.
-
Install wheels.
Note:
^
After replacing brake pads, depress brake pedal firmly several times with vehicle stationary so that the brake pads are properly seated in their
normal operating position.
^
Check brake fluid level after replacing brake pad.