GTI L4-2.0L Turbo (BPY) (2007)
-
Insert inner brake pad with retaining spring in brake caliper (piston).
-
Set outer brake pad - 2 - with retaining springs into brake caliper.
-
Place brake caliper with brake pads on brake carrier.
-
Tighten brake caliper to brake carrier using both guide pins.
-
Install both protective caps.
-
Insert brake caliper retaining spring in brake pad retaining spring and press under brake carrier.
-
Connect brake pad wear indicator connector.
-
Install wheels.
Note:
^
After replacing brake pads, depress brake pedal firmly several times with vehicle stationary so that the brake pads are properly seated in their
normal operating position.
^
Check brake fluid level after replacing brake pad.
C 38
Brake pads, removing and installing
Special tools, testers and auxiliary items required