GTI L4-2.0L Turbo (BPY) (2007)
/Page-1444002.png)
5. Harness connector
^
Brake pad wear indicator
6. Brake caliper
^
Do not remove brake hose when replacing brake pad
7. Guide pins, 30 Nm (18 ft lb)
8. Concealment cap
^
Remove
9. Brake hose with banjo fitting and union bolt, 35 Nm
10. Guide pins, 30 Nm (18 ft lb)
11. Concealment cap
^
Remove
12. Bolt
13. Bracket
14. Wheel bearing housing
^
With integrated brake carrier
15. ABS wheel speed sensor
^
Before inserting sensor, clean inner surface of bore hole and coat with hot bolt paste G 052 112 A3
16. Hex socket head bolt, 8 Nm
17. Wheel bearing/hub unit
^
The ABS sensor ring is installed in wheel bearing
18. Cover plate
Brake Caliper, Removing and Installing
Brake caliper, removing and installing
Special tools, testers and auxiliary items required
^
Torque wrench V.A.G 1331
