GTI L4-2.0L Turbo (BPY) (2007)
-
Remove both mounting bolts from brake caliper, counter-hold on guide pin when doing this.
-
Remove brake caliper from brake carrier.
Brake caliper, installing
^
Piston is pressed back.
^
Brake pads sit in retaining springs on brake carrier.
-
Secure brake caliper on brake carrier using new self-locking bolts.
-
Screw brake line on brake caliper.
-
Bleed braking system.
-
Hook in brake cable and secure it to the holder with spring clip.
-
Adjusting parking brake.
-
Install wheels.
Note:
^
Before moving vehicle, depress brake pedal several times firmly to properly seat brake pads in their normal operating position.
^
Check brake fluid level.
CII 41
Brake caliper, removing and installing
Special tools, testers and auxiliary items required
^
Torque wrench V.A.G 1331