GTI L4-2.0L Turbo (BPY) (2007)
1. Brake caliper with parking brake cable lever
^
Replace brake caliper if leaking at parking brake cable lever
2. Dust cap
3. Bleeder screw, 10 Nm
^
Apply a thin coat of assembly paste G 052 150 A2 to the threads before installing.
4. Hex bolt, self-locking, 35 Nm
^
Replace
^
When loosening and tightening, counter-hold at guide pin
5. Guide pin with stepping
^
Shorter than item 6
^
Grease before pulling on protective cap
6. Guide pins
^
Longer than item 5
^
Grease before pulling on protective cap
7. Protective cap
^
Pull onto brake carrier and guide pin
8. Brake pad with damper
^
Supplied as pre-assembled replacement part with sufficient grease on guide pins
^
If protective caps or guide pins are damaged, install repair kit. Use supplied grease packet to lubricate guide pins.
9. Protective cap
^
Pull onto piston with outer sealing lip
10. Piston with automatic adjustment
^
Apply thin coat of assembly paste G 052 150 A2 to piston before inserting