GTI L4-2.0L Turbo (BPY) (2007)
-
Remove seal with Trim Removal Wedge 3409.
Piston, Installing
Piston, installing
-
The surface of the piston and seal must only be cleaned with mineral spirits and then dried.
-
Thinly coat piston and seal with assembly paste G 052 150 A2 before inserting.
-
Place protective cap with outer sealing lip on piston.
-
Insert inner sealing lip in cylinder groove with Trim Removal Wedge 3409.
Hold piston in front of brake caliper for this procedure.
-
Install piston by turning knurled wheel toward right.