GTI L4-2.0L Turbo (BPY) (2007)
/Page-1453007.png)
^
If the sealing plugs are removed too early, brake fluid can escape. If this occurs, unit may not be sufficiently filled or adequately bled.
^
When installing, make sure that rubber installation pieces are not pressed out of console.
-
Installation is in the reverse order of removal.
-
Remove Brake Pedal Actuator V.A.G 1869/2.
-
Bleed braking system.
-
Enter radio code.
-
Code ABS Control Module J104 with in "Guided Fault Finding".
