GTI L4-2.0L Turbo (BPY) (2007)
-
Oil filter wrench VAS 3417
-
Torque wrench V.A.G 1331/ Needle-nose pliers
Perform the following work procedure:
-
Unscrew dust cap -arrow- from oil filter housing.
-
Oil filter housing must be drained before it is removed.
-
Screw oil drain adapter T40057 into oil filter housing and hold hose into an oil collecting pan.
Note:
When screwing in oil drain adapter T40057, a valve in the oil filter housing is opened. If oil drain adapter T40057 is unscrewed again, the
valve closes automatically again.
-
Allow engine oil to drain.
-
Unscrew oil drain adapter T40057 again.
-
Oil filter housing can now be unscrewed using oil filter wrench VAS 3417.