GTI L4-2.0L Turbo (BPY) (2007)
If LED does not light up:
-
Start engine and increase engine speed: LED must light up at 1.2 to 1.6 bar positive pressure, otherwise replace oil pressure switch.
-
Increase engine speed further. At 2000 rpm and an oil temperature of 80° C, the oil pressure should be between 2.7 to 4.5 bar.
At higher engine speeds oil pressure must not exceed 7.0 bar
If specification is not obtained:
-
Check screen in oil intake pipe for soiling.
Note:
^
Also, mechanical damage e.g. bearing damage can also be the cause of too low oil pressure.
If no malfunction can be found:
-
Replace oil pump.
If specification is exceeded:
-
Check oil channels.
-
If necessary, replace oil filter bracket with pressure relief valve