GTI L4-2.0L Turbo (BPY) (2007)
Right Footwell Vent Temperature Sensor G262, Removing And Installing
Removing:
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
NOTE: Right Footwell Vent Temperature Sensor G262 is depicted with instrument panel removed. It is not necessary to remove instrument panel.
-
Remove glove compartment
-
Disconnect electrical connection at sensor -1-.
-
Rotate sensor -1- 90 degrees and remove from housing.
Installing:
Install in reverse order of removal.
Evaporator Temperature Sensor G308 or Evaporator Vent Temperature Sensor G263, Removing and
Installing
Evaporator Temperature Sensor G308 Or Evaporator Vent Temperature Sensor G263, Removing And Installing
Removing:
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Remove front passengers footwell cover -1-.