GTI L4-2.0L Turbo (BPY) (2007)
Installing:
Install in reverse order of removal, noting the following:
NOTE: The assistance of a second mechanic is necessary to install the heating and ventilation unit.
-
When inserting heating and ventilation unit, have the second mechanic guide both coolant pipes to heater core through the seal (from engine
compartment).
-
When installing, ensure condensation water drain hose is seated correctly
-
After installing heater core, replace engine coolant completely.
5. Bracket
6. Screws
-
8 Nm
7. Assembly carrier
8. Right support
9. Left support
10. Screws
-
Qty. 2
-
9 ±1.3 Nm
11. Bracket
12. Screws
-
Qty. 2
-
9 ±1.3 Nm
Heating and A/C unit seal at bulkhead, installation position
NOTE: Note installation position of seal -A- during assembly.
Automatic A/C System - Climatronic
Heating And A/C Unit, Removing And Installing
Preparation:
Special tools, testers and auxiliary items required
-
Drip tray for VAS6100 VAS 6208