GTI L4-2.0L Turbo (BPY) (2007)
-
Rotate bulb holder -1- in direction of -arrow- and remove from reflector as far as electrical cable permits.
-
Push bulb -2- into socket -1- and rotate in direction of -arrow-.
-
Remove bulb -2- from bulb holder.
Installing:
Install in reverse order of removal, noting the following:
CAUTION:
-
Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that
evaporates on the bulb during operation can cause the glass to cloud over.
-
When installing cap, ensure proper seating. Water intrusion will damage headlamp.
-
Check bulb function.
-
Check headlamp aim and adjust if necessary.