GTI L4-2.0L Turbo (BPY) (2007)
/Page-2606002.png)
-
Remove HID Lamp Igniter Unit N195 straight back from headlamp.
-
Remove both Headlamp Beam Adjusting Motor bolts -arrows-.
-
Raise low beam reflector and pivot adjusting motor so that ball head -1- can slide out of ball head mount -2- - in direction of arrow -.
-
Lower low beam reflector again, raise adjusting motor -1- slightly and rotate in -direction of arrow-.
-
Remove adjusting motor from headlamp housing while being careful of connected wires.
