GTI L4-2.0L Turbo (BPY) (2007)
-
Insert Low Beam Headlamp -1- into lamp socket so that pin on Low Beam Headlamp fits in recess -arrow- of lamp socket -2-.
-
Insert lamp socket with Low Beam Headlamp -1- into headlamp and rotate lamp socket with Low Beam Headlamp in -direction of arrow-.
-
Insert cover cap -1- into recess on headlamp and tighten cover cap in -direction of arrow-.
-
Check headlamp for function.
-
Check and adjust headlamp aim if necessary.
Replacing High Beam Headlamp
NOTE: Illustrations depict replacement of lamp for high beam headlamp at left headlamp.
Removing:
-
Switch off ignition, switch off all electrical consumers and remove ignition key.