GTI L4-2.0L Turbo (BPY) (2007)
/Page-2688001.png)
Tail Lamp: Service and Repair
Taillamp Assembly In Side Panel, Removing and Installing
Taillamp Assembly In Side Panel, Removing And Installing
Removing:
-
Switch off ignition, switch off all electrical consumers and remove ignition key.
-
Press side trim -1- to side in -direction of arrow-.
-
Remove connector -2- by pressing clip -1- in -direction of arrow-.
-
Remove mounting nuts -1- at Tail lamp assembly in side panel.
-
Remove Tail lamp assembly.
Installing:
Install in reverse order of removal, noting the following:
