GTI L4-2.0L Turbo (BPY) (2007)
/Page-2687001.png)
Tail Lamp: Adjustments
Taillamps, Adjusting
NOTE: On vehicles from November 2005, an adjustment element is installed which can be used to adjust the flush dimension to the bumper trim. On
vehicles before November 2005, this adjustment is not possible.
-
If the Tail lamp does not sit flush as shown in the illustration, it can be adjusted with the adjusting element. An adjustment of ± 2 mm is possible.
-
Press side trim -1- to side in -direction of arrow-.
-
Loosen nuts -1- on Tail lamp in side panel.
