GTI L4-2.0L Turbo (BPY) (2007)
Oil Filter: Removal and Replacement
Oil filter bracket, removing and installing
Removing
-
Remove intake manifold.
-
Disconnect coolant pipes.
-
Remove oil cooler by removing bolts - A - and - B -.
-
Disconnect connector - A - from oil pressure switch and remove bolt - B - for Ground (GND) wire.
-
Remove mounting bolts - arrows - and remove oil filter bracket.
Installing
-
Replace gaskets and.
-
Insert baffle plate.
-
Install oil filter bracket and tighten bolts uniformly to 15 Nm.
-
Install oil cooler with bracket for coolant pipes.
The rest of assembly is in reverse order of disassembling.