GTI L4-2.0L Turbo (BPY) (2007)
Wheel Bearing: Removal and Replacement
Wheel Bearing Unit, Removing and Installing
Wheel bearing unit, removing and installing
Special tools, testers and auxiliary items required
^
Torque wrench VAG 1332
Removing
-
Loosen drive axle bolt to wheel hub.
Note: When doing this, vehicle must not stand on wheels, otherwise wheel bearing may be damaged.
-
Remove wheel.
-
Remove brake caliper and hang on body with wire.
-
Remove ABS wheel speed sensor.
-
Remove disc brake.
-
Press drive axle out of wheel hub (in direction of transmission) as far as possible.
-
Remove bolts - arrows -.
-
Remove wheel bearing unit from wheel bearing housing.
Installing
Installation is in reverse order of removal.
-
Install brake caliper.
-
Tighten drive axle bolt to wheel hub.
Note: When doing this, vehicle must not stand on wheels, otherwise wheel bearing may be damaged.
-
Install ABS wheel speed sensor.
-
Install wheel and tighten.