GTI L4-2.0L Turbo (BPY) (2007)
Fuse Block: Service and Repair
Fuse Holder In Left Instrument Panel, Removing and Installing
Fuse Holder In Left Instrument Panel, Removing And Installing
Special tools, testers and auxiliary items required
-
Trim removal wedge VAS 3409
NOTE: When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool (trim
removal wedge VAS 3409, screwdriver) will be positioned, using commercially available adhesive tape.
CAUTION: When disconnecting and connecting battery, the procedure must be followed as described.
Removing:
-
Disconnect battery.
-
Remove storage compartment on drivers side.
-
Remove side cover -1- of instrument panel, do this by inserting trim removal wedge VAS 3409 or a screwdriver into recess -2- and pry off cover
-1- in -direction of arrow-.