GTI L4-2.0L Turbo (BPY) (2007)
-
At the same time, push release tool in direction of terminal housing and pull the released terminal out of terminal housing -arrow-.
-
After removing the terminal, release tool can be pulled out of terminal housing again.
Special connector systems
NOTE: If necessary, release or remove housing securing mechanisms (secondary locks) using specified tool before releasing the terminals.
Fasten terminals:
-
Guide the release tool which fits the terminal housing into release channel on terminal housing -arrow-.
-
Grasp terminal at wire and push it gently into terminal housing.
NOTE: By pushing terminal in direction of terminal housing, retaining tabs of terminal are lifted off the housing shoulder and can be released
using the release tool.
-
At the same time, push release tool in direction of terminal housing and pull the released terminal out of terminal housing -arrow-.
-
After removing the terminal, release tool can be pulled out of terminal housing again.