GTI L4-2.0L Turbo (BPY) (2007)
Electronic Throttle Actuator: Service and Repair
Accelerator Pedal Module, Removing and Installing
Accelerator Pedal Module, Removing And Installing
Special tools, testers and auxiliary items required
-
Release tool T10238
-
Remove steering column cover -arrows-.
-
Pry out cover cap using a screwdriver.
-
Remove mounting bolt.
-
Slide release tool T10238 as shown into openings designated for it until it stops and remove accelerator pedal module.
-
Disconnect electrical harness connector and pull off wire routing on accelerator pedal module.
Installing: