volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Air Flow Meter/Sensor > < Engine Cover/Air Filter, Assembly Overview|Page 6119
Page 2
background image

-

Remove air filter element out of engine cover.

Air filter insert, installing: 

NOTE: 

-

Always use an original equipment air filter element.

-

Air filter housing must be clean.

-

Note the following when blowing out the air filter housing with pressurized air: To avoid malfunctions, cover Mass Air Flow (MAF) Sensor G70
with a clean cloth.

-

Check Mass Air Flow (MAF) Sensor G70 and intake duct for salt residue, dirt and leaves.

-

Ensure air filter element is properly centered when placed into the mounting of the lower part of air filter housing.

-

Set upper part of air filter housing onto lower part of air filter housing, without using much force. When doing this, make sure that the upper part
of air filter housing is not placed crooked onto air filter element (observe sealing lip of air filter element).

Further installation is in reverse order of removal.

Air Flow Meter/Sensor > < Engine Cover/Air Filter, Assembly Overview|Page 6119