GTI L4-2.0L Turbo (BPY) (2007)
Intercooler: Description and Operation
General Notes
-
Charge air system must be properly sealed.
-
Always replace self-locking nuts.
-
Charge air hoses and pipes as well as their connections must be free of oil and grease before re-installation.
-
Do not assemble charge air hoses and pipes with lubricants containing oils, only coat with water (without additives) if necessary.
-
Note installation marks on hoses and components.
-
All hose connections for charge air system are secured by spring-type clamps or by connector couplings.
-
Install only approved clamps for securing hose connections.
-
Spring Type Clip Pliers or Hose clamp pliers are recommended for installing spring clamps.
-
For connector couplings, always note the following points:
-
Release connector coupling by pulling securing clip -arrow-.
-
Disconnect the hose and line without the assistance of tools.
-
When assembling, make sure the retaining tabs -A- are engaged securely.