GTI L4-2.0L Turbo (BPY) (2007)
Headlamp Alignment Control Module: Service and Repair
Headlamp Range Control Module J431, Servicing
Headlamp Range Control Module J431, Servicing
Headlamp Range Control Module J431, removing and installing
Special tools, testers and auxiliary items required
-
Trim removal wedge VAS 3409
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
When removing switches, trim, covers or displays, prevent damage to visible areas always applying appropriate tape to area
surrounding the component, and the tools being used (screwdrivers, wedges etc.).
Removing:
-
Remove right instrument panel side cover -1- by inserting trim removal wedge VAS 3409 or a screwdriver into recess -2- and pry off cover -1- in
direction of -arrow-.