GTI L4-2.0L Turbo (BPY) (2007)
Seat Belt Height Adjuster: Service and Repair
Front Seatbelt Height Adjuster, Removing And Installing
NOTE: Removal and installation is described for the left-hand side of the vehicle. Removal and installation for the right-hand side is performed in the
same manner.
Removing
-
Remove upper B-pillar trim
NOTE: Belt anchor or anchor rail does not need to be removed on seat belt.
-
Remove bolt - 1 - (40 Nm) and remove belt relay - 2 - from belt height adjuster.
-
Remove bolt - 3 - (20 Nm) and separate belt height adjuster - 4 - from mounting in carrier plate.
Installing
-
Installation is performed in the reverse order of removal.