GTI L4-2.0L Turbo (BPY) (2007)
/Page-388004.png)
-
If present, disconnect front seat heating connector - 3 -.
-
Disconnect black Seat Occupied Recognition Safety Belt Force Sensor G453 connector - 5 -.
-
Disconnect yellow Front Passenger's Safety Belt Switch E25 connector - 4 -.
-
If present, disconnect front seat backrest heating connector - 6 -.
-
Cut wiring harness cable ties - 2 -.
-
Slide white bracket - 1 - left and remove from seat frame.
-
Remove all connectors from bracket.
CAUTION: Do not disconnect connector from Seat Occupied Recognition Control Module J706.
