GTI L4-2.0L Turbo (BPY) (2007)
Install in reverse order of removal, noting the following:
NOTE:
-
Always clean windshield surface inside bracket for Rain/Lamp Recognition Sensor G397 before installing.
-
Surface (connecting pads) of Rain/Lamp Recognition Sensor G397 must not be soiled when installing.
-
If the surface (connecting pads) of Rain/Lamp Recognition Sensor G397 is soiled, it can be potentially cleaned by "applying" and then "pulling
off" one or more adhesive strips.
-
After installing Rain/Lamp Recognition Sensor G397, there must be no air bubbles between windshield and surface (connecting pads).