GTI L4-2.0L Turbo (BPY) (2007)
-
Remove hex nuts -1-.
-
Open -arrows- covers -2- for wire guides at E-box.
-
Remove wires from connecting pins.
-
Unclip wires from wire guides.
NOTE: Following illustration shows "High" E-box version. Removing and installing the "Low" version is performed in the same way.
-
Remove central mounting bolt -arrow- for E-box -1-.
NOTE: Removing the central mounting bolt -arrow- presses off the E-box -1- upward from E-box bracket.
-
Remove E-box -1- upward from E-box bracket.
-
If necessary, remove air filter housing.
-
Remove battery.